Shop the complete ParSkins collection of golf club skins, shaft skins, and golf cart wraps. Choose from designs for drivers, fairway woods, hybrids, driver shafts, iron and putter shafts, and golf carts. Browse popular patriotic, money, carbon fiber, exclusive, and licensed patterns, or create a custom club head skin using your own properly licensed artwork or photo.
Shop ParSkins Golf Club Skins, Shaft Skins and Golf Cart Wraps
Explore the complete ParSkins lineup of vinyl golf wraps for club heads, shafts, and golf carts. This collection includes driver, fairway wood, and hybrid skins, golf shaft skins, and larger golf cart wraps in a wide selection of patterns.
ParSkins provide a removable way to change the appearance of golf equipment while adding a layer over the original surface. Available designs range from subtle carbon fiber finishes to patriotic, money, camouflage, skull, graphic, licensed, and exclusive patterns.
Customize one club, coordinate a club head and shaft, create a personalized design, or carry your preferred pattern across your golf equipment and golf cart.
Choose the Right ParSkins Product
Driver, Fairway Wood and Hybrid Skins
ParSkins club head skins are designed for drivers, fairway woods, and hybrids. Driver skins and fairway wood or hybrid skins are offered as separate options because the sizes and shapes of these club heads differ.
Choose the correct club type and select a right-handed or left-handed option when available. The flexible vinyl is oversized so it can be positioned over the club head, worked around curves and recessed areas, and trimmed along the club’s natural edge during installation.
The matte, non-reflective finish changes the appearance of the club without requiring permanent paint or refinishing. Club head skins are currently priced at $29.99.
Browse all driver, fairway wood, and hybrid skins, or read about the benefits of vinyl wraps for drivers and fairway woods.
Golf Shaft Skins
Golf shaft skins are designed for driver shafts, iron shafts, and putter shafts. Choose between the driver size or the iron and putter size based on the club you want to customize.
Shaft skins add a pattern along the length of the shaft and can be installed on their own or paired with a coordinating club head skin. A shaft skin does not include a matching club head skin unless the individual product page specifically states otherwise.
Golf shaft skins are currently priced at $21.95. Browse the available driver, iron, and putter shaft skins.
Golf Cart Wraps
Golf cart wraps are larger vinyl sheets designed for customizing golf cart body panels and exterior surfaces. Selected patterns are available in 47in x 120in film and 53in x 120in low-surface-energy film.
Golf cart surfaces and plastics can vary. The low-surface-energy option is intended for plastics that may be more difficult for standard vinyl adhesive to bond to. Review the material option on the individual product page and measure the intended coverage area before ordering.
Golf cart wraps currently start at $199.95. Browse the available golf cart wrap patterns and material options.
Custom Club Head Skins
The custom ParSkins collection allows you to create a personalized skin for a driver or fairway wood using your own photograph, artwork, logo, or properly licensed design.
Customers must own the rights to submitted images or have permission to reproduce the artwork. Custom club head skins are currently priced at $39.99.
Prices and available options may change. Review the individual product page for current pricing, sizing, pattern availability, club orientation, material choices, and compatibility before ordering.
Popular ParSkins Patterns
The complete ParSkins collection includes patterns ranging from understated finishes to bold graphics. Popular categories include:
Pattern availability varies by product type. A design offered for a driver or fairway wood may not also be available as a shaft skin or golf cart wrap. Check the individual product page to confirm available sizes and applications.
Material, Finish and Performance
ParSkins product listings describe the wraps as double-cast vinyl with a matte, non-reflective finish and a dry application method. The flexible material can be positioned and worked around curved surfaces using controlled heat.
- Matte, non-reflective finish
- Double-cast vinyl construction
- Dry application method
- Flexible film for curves and contours
- Removable using controlled heat
- Made in the USA
Current product listings state a material lifespan of up to eight years. Actual performance can vary based on the product, installation quality, surface preparation, frequency of use, abrasion, storage, cleaning methods, weather exposure, and the condition of the vinyl edges.
The estimated material lifespan is not a guarantee that every installed club skin, shaft skin, or golf cart wrap will remain unchanged for eight years. Golf equipment that is frequently used, transported, and exposed to bag wear may experience more abrasion than equipment stored indoors.
Cosmetic Protection for Golf Equipment
ParSkins add a removable layer over the covered portion of a club head, shaft, or golf cart panel. This layer can help reduce direct exposure to light scratches, bag wear, dirt, and everyday cosmetic contact.
The vinyl does not repair existing damage and will not protect golf equipment from every impact, chip, abrasion, or environmental condition. Existing dents, deep scratches, peeling coatings, or surface defects may remain visible beneath the wrap.
How to Install ParSkins
Club head skins are designed for do-it-yourself installation. In addition to the vinyl skin and included knifeless tape, you may need scissors, a lint-free towel, an alcohol-based cleaner or degreaser, and a heat gun or hair dryer.
- Clean the club head to remove dirt, grass, oil, wax, and fingerprints.
- Allow the surface to dry completely before applying the vinyl.
- Position the knifeless tape around the natural edge of the club head.
- Remove the vinyl backing and position the skin over the club.
- Reposition and work the material across the surface.
- Use controlled heat to help the vinyl conform around curves.
- Pull the knifeless-tape filament to trim away excess material.
- Apply low heat and firm pressure around the finished edges.
A typical club head installation takes approximately 10 to 15 minutes. Installation time can vary based on the club shape, the installer’s experience, and the number of curves or recessed areas.
Review the complete ParSkins installation guide before beginning your application.
Golf Shaft Skin Installation
Before installing a shaft skin, clean the shaft thoroughly and remove any dirt, grease, wax, or residue. Carefully align the pre-cut vinyl along the shaft and smooth it into place while avoiding wrinkles or trapped air.
Select the correct driver or iron and putter option before ordering. Using the wrong size may affect alignment, coverage, and the finished appearance.
Golf Cart Wrap Installation
Golf cart wraps require measuring, positioning, heating, and trimming larger sheets of vinyl. The surface should be clean, dry, and free from wax, silicone, dirt, and detailing products that could interfere with adhesion.
Because golf carts contain larger panels, curves, edges, and different types of plastic, these wraps may be more challenging to install than club head or shaft skins. Confirm that you have selected the appropriate standard or low-surface-energy material for the intended surface.
Installation Tools and Preparation
Proper preparation and application tools can make it easier to position, smooth, heat, and trim the vinyl. Customers who need additional supplies can browse the ParSkins installation tools collection.
Available tools may include:
- Heat guns
- Application squeegees
- Precision knives
- Replacement blades
- Surface preparation supplies
Always use heat carefully. Excessive heat can overstretch or damage the vinyl and may also affect the underlying club finish or plastic surface.
Removing or Replacing ParSkins
ParSkins can be removed when you want to return to the original appearance or install a different pattern. Warm the vinyl with a heat gun on a low setting or a hair dryer, then slowly peel the material away from the surface.
Do not overheat the club or pull the vinyl away aggressively. Slow removal helps reduce unnecessary stress on the underlying finish.
Any remaining adhesive residue may be cleaned with rubbing alcohol or an appropriate surface-safe adhesive remover. Test cleaning products in an inconspicuous area before applying them broadly.
Create Custom Golf Club Skins
Custom ParSkins allow you to turn a photograph, approved logo, or original design into a personalized driver or fairway wood skin.
Custom skins may be used for:
- Personal photographs or artwork
- Golf gifts
- Approved company branding
- Golf outings and special events
- Team or organization graphics used with permission
The uploaded image should be clear and large enough to print at the required size. Low-resolution images may appear blurry or pixelated when enlarged.
Customers are responsible for confirming that they have permission to reproduce submitted photographs, logos, characters, trademarks, or other copyrighted artwork.
See ParSkins on Golf Clubs
Visit the ParSkins customer gallery to see completed driver and fairway wood installations in different patterns and colors.
The gallery can help you compare how patriotic, money, carbon fiber, camouflage, graphic, custom, and more understated patterns look when applied to golf equipment.
Benefits of ParSkins Golf Wraps
- Customize club heads, shafts, and golf carts without permanent paint.
- Choose from many patterns across multiple golf product types.
- Add a removable layer over the original surface.
- Help reduce direct cosmetic wear on covered areas.
- Select driver, fairway wood, hybrid, driver shaft, iron, or putter options.
- Coordinate selected patterns across club heads and shafts.
- Create a custom club head skin using properly licensed artwork.
- Remove or replace the vinyl when you want a different design.
Frequently Asked Questions
Q: What products are included in the ParSkins All Products collection?
A: The collection includes vinyl skins for drivers, fairway woods, hybrids, driver shafts, iron and putter shafts, and golf cart wraps. Custom club head skins and installation tools are available through their related collections.
Q: Will a ParSkins club head skin fit my driver or fairway wood?
A: Driver and fairway wood or hybrid skins are oversized so they can be positioned and trimmed to the shape of the club. Choose the correct club type and right-handed or left-handed orientation before ordering.
Q: What is included with a club head skin?
A: Club head skin listings include the vinyl for the selected club type and knifeless tape for trimming. Cleaning supplies, scissors, a heat gun or hair dryer, and other application tools may need to be purchased separately.
Q: How long does it take to install a club head skin?
A: ParSkins estimates approximately 10 to 15 minutes for a typical club head installation. The exact time depends on the shape of the club and the installer’s experience.
Q: Can ParSkins be removed?
A: Yes. Warm the vinyl using a heat gun on a low setting or a hair dryer, then slowly peel it away. Any remaining adhesive residue can be cleaned using a surface-safe product.
Find a ParSkins Design for Your Golf Equipment
Browse the complete collection to compare club head skins, shaft skins, and golf cart wraps by pattern, product type, club orientation, size, and material option.
Choose one design for a single club, coordinate a club head and shaft, create a personalized skin, or carry your preferred pattern across your golf equipment and golf cart.
